Modified Stock Firmware MOD3

     In this latest version of TomDuhamel, it brings us a modified version of the Stock Firmware with several additions, such as being able to update our roms from FTP, updating the time with the internet, and more functions that I detail below:

This is a brief overview of the new features in this release. The full description of these features is offered below.

  • Single or dual card setup — your choice
  • Over the air updates – What?!

FTP

This release includes a full fledge FTP server. You can add new games to you collection without the need to pull out the SD card off your console every single time.

Simply point your FTP client to your console’s IP address and you’re done. No need to install any software, as FTP is so common that even Windows Explorer handles it.

Instructions:

First, make sure you are currently connected to WiFi (obviously). From the WiFi Settings page on your console, you can also find the IP address that you need to use to connect to it. From a computer that is connected to the same network, in the address bar of Windows Explorer, enter the address as ftp://128.1.0.100 (substituting the actual address of your device and not including a trailing slash) and press enter. You should be prompted for a username and password, both are game (all lowercase). You should land directly in the root of your ROMs SD card, but should you get lost (did you put a trailing slash?), the correct path is /mnt/mmc/.

Notes:

  • Depending on your router configuration, the IP may be the same permanently or change every time.
  • Public WiFi usually does not permit devices to see each other, for obvious security reasons — you will not be able to FTP into your device from such a network.
  • This uses plain FTP — not SFTP, which stands for Secure FTP. Because who really needs security when the password is a four letter word published on Reddit? Just don’t connect into untrusted WiFi networks.
  • It is possible to navigate the entire firmware from your FTP session. Obviously, do not change anything you are not familiar with — or actually yes, do it, but be ready to reflash your card. This can be useful if you want to change your theme, for example — a few users have posted methods and files over the last few months.

Clock Automatically Updated

You’ve probably set the date and time immediately upon turning on your console for the very first time, only to realise that it doesn’t stick when you turn it off. Mine gains a couple of hours overnight, but different people are reporting different experiences.

Good news! This release uses NTP (Network Time Protocol) to automatically adjust time with the internet. Needless to say, this only works when connected to WiFi and the internet.

The time on your device should update within a few seconds of connecting to WiFi, either manually or automatically after power on. However, you may find that the time at the top of the launcher does not update immediately ­— it should be correct when you come back to it after playing some game, and it also shows properly at the top of RetroArch.

Timezone information is obtained by geolocating your IP address. In other words, we are asking your internet provider what city you live in. This is the same method used by advertisers to find hot single women in your city. This will automatically update if you connect to WiFi at your hotel during a trip overseas.

Automagically Extended Games Partition

Because you’ve asked for more options, here it is.

If you are using a separate card for your games and this card is in TF2, it will be used as the games partition. This behaviour is as before. This card must be a valid SD card formatted with either exFat or FAT32. The system will not attempt to format this card, and if deemed invalid, will simpy be ignored.

If TF2 is empty, and no existing valid partition is found on TF1, this is when the magic operates. A new games partition will be created from the empty space on your card, after the system partitions. This only takes a few seconds and is barely noticeable during boot.

Note that this new partition will be hidden when a card is used in TF2.

Over The Air Update

You’ve read it right! Exploiting the WiFi capabilities of your device, this mod includes an over the air update system.

Make sure you are connected to WiFi, then head into the APPS folder and select Check for Updates. This will download and install any outstanding available updates from our top of the line webservers in Brazil. This may take a few minutes, during which your screen will simply look blank with no feedback, but be patient.

There is unfortunately no way of informing you of what updates, if any, were performed. You may occasionally notice a new file in your APPS with extra information. Major updates and new features will be announced here. Most updates will probably be small fixes and may not even deserve a mention.

Please not that this feature is not expected to be used to update whole underlying stock firmware — although I will definitely try. This feature is primarily meant to reduce downloading and flashing new firmware by provinding fixes and new features, but will likely not replace it entirely.

RetroArch Configuration Files on SD Card 2

Your RetroArch configuration file is now saved on your ROMs SD card. This means that it follows you when you flash a new version of the firmware, or if you bring your card on a different device with the same firmware.

A copy of the original configuration file is automatically copied to your games partition if missing when turning on your device. It is located under config at the root of your games partition, whether on the system card of the TF2 card. You can still reset it the usual way by using the menu item in the launcher.

Minor Features and Fixes

This release includes a number of minor configuration fixes. Mostly to Nintendo 64 configs, for improved performance and controller compatibility on the Plus. A number of other minor alterations were also made to RetroArch default configuration file and other area of the system, for performance or aesthetical purposes, many of which will probably not even be noticeable by common mortals.

Known Issues

When the clock updater kicks in, shortly after WiFi comes up, this confuses the software into thinking you have been inactive for a very long time. This instantly triggers sleep mode. This is a minor annoyance, as you only need to short press the power button to turn it on again, however it can definitely confuse the unexpecting user. One obvious workaround is to turn off sleep mode from the settings (set Lock screen to Never).

The launcher sometimes crashes or reboots randomly after some period of inactivity. This behaviour happens on the unmodified stock system. I am not sure if it is intentional or not.

You can download the Image from HERE or from our Firmwares Section

Rom images from the stock card

     If you use the stock operating system that comes with the console, or you have downloaded a firmware update with the roms, you will have been able to see that the images associated with these roms are tiny and do not look good at all. It is for this reason that we have spent a few hours resizing them to their size so that they look much better. Here we leave you the download of these images so that you can replace them. They are based on the Firmware of 01-30-24. If you have added your roms or use any other romset they will not work for you, but for anyone who uses the ones that came standard, here they are:

682 Downloads

New Wallpapers for Stock Firmware

     We have recently discovered how to be able to change theme files directly from the console itself, and we have created some simple scripts to be able to use without having to install programs that allow access to the Linux partitions of the operating system card, since the vast majority of people use Windows on their computers.
It is only necessary to download the wallpaper you want, unzip the files and copy them to the partition where the ROMS are, which is accessible and copy the files there within the APPS folder.
Afterwards from the console we only have to select the wallpaper and the number 5 will be added to the stock menu to be able to select it. This will install the wallpapers for the console and for the HDMI output. And if later you want to install another one that you like more, if you have selected number 5, the new one will change automatically.
Other customizations will be added very soon using this method, but while we are creating them, you can now download more than 75 wallpapers to choose from from our new Wallpapers for Stock section.
Enjoy them! Here we show you some of the available ones…

Linux Desktop for RG35XX Plus & H

     A few days ago a news article appeared that talked about a Linux distribution running on the console, capable of performing many tasks, including playing video, browsing the Internet, watching YouTube videos, etc… And although at first I thought, that there was no need for it, and that it was more of a curiosity, speaking with a friend, he told me: “Hey, that’s good, and if you connect a keyboard and a mouse then you have a pocket laptop with Linux to take with you around Not there? And with HDMI output!” And of course, from that moment on I totally changed my way of seeing it and I agreed with him, although logically for very light tasks, but yes, it can be a pocket computer. (Although the mouse, keyboard and necessary cables already take up more than the machine itself…) The person in charge of development is called MrJackSpade and you can see his project on GitHub here

A working demo on YouTube:

 

Theme Customization App

     Yesterday, our collaborator Gabi_90 showed us a Github page where there were some files with new topics for the Stock Firmware of our RG35XX Plus and H, but it was not until today, when I had some time to investigate it, that I discovered that it was not There are only several themes to be able to change the Firmware, but also a Tool is included to be able to modify themes to your liking and be able to use them on our consoles.

The developer cbepx-me, or at least that is how his nickname appears on Github, has created this Script, which what it does is replace the theme files with others that you add and thus be able to use them in the console. It also offers stock images and files so that everyone can create their own theme by modifying them. For many users, it is very difficult to access the Linux partition where these files are hosted on the SD, so this way you can edit them on your Windows or Mac and then run the script from the console to easily install it.

While more powerful Custom Firmwares appear for our consoles, it is a good option to customize them a little more to our liking…

I leave you a direct link to Github from >>HERE<<

Soon we will make a section to be able to put Themes to download and use with this Script.

New RG35XX Plus Update

     A new update for the RG35XX Plus has been released from Anbernic, which you can download from our Firmware section, dated 01-18-2024 (20240118), and which apparently includes the improvements, changes and fixes of the latest version of the firmware of the RG35XX H.

Here is a list of the changes:

New Features:

1. Added support for sub folders of GBA/GBC/GB/GG/SMS/MD/PCE/FC/SFC/NGP/WSC emulators

2. Add Atari7800 (A7800), Atari5200 (A5200), Atari800 (A800), Atari Lynx (LYNX) emulators

3. When adding search games, RA games can switch core functions with the Y button

Updates:

1. Modify the text for the LED light setting function during sleep mode

2. When modifying the external handle, RA menu control settings are set

3. Modify the game loading progress image

4. Modify the NDS emulator save to the “save_nds” folder in the root directory of the TF where the game is located

Bug Fixes:

1. Fix RA crash issue when setting up independent thread video function for RA

2. Fix the issue of browsing game files in the PSX independent emulator’s disk swapping function

3. Fix other known issues

Latest Updates

     We have learned that the latest version of Koriki/Batocera for the RG35XX Plus and H, although still in the Alpha phase, has been recently updated and is already quite stable and functional. Developer Acmeplus is doing a GREAT job with this version, and we hope to see it move to Beta soon. You can take a look at its github, you have the link in our Firmwares section.

Here on the page, we have been updating some things, little by little we are adding more content, in the free time we have. For example, a good number of Boot Logos are now available for Stock Firmware that you can download from the Boot Logos section.

We have also updated the Bios and Roms page, which was pointing to wrong links, inherited from our original RG35XX page… Now all the links to the Bios and Roms work correctly 😉

We will continue adding content little by little…

Ah! We already received our RG35XX H, but we haven’t had time to test too many things, this weekend we will test it well…

New Update

Anbernic has released the latest update on it’s site. You can download it on our Firmwares section.
This is the Cahnagelog:

System usage precautions:
1.35xxp-64GB is a complete image of the system and game used by 64GB TF1, and cannot be expanded.
2.35xxp-16GB, is a pure system without games and is only available for use with a 16GB TF1. It cannot be expanded.
3.64GB ROM is used by TF2 and needs to be matched with the 16GB system image of TF1.
Tip: 2 and 3 are equivalent to splitting the image of 1 into TF1 and TF2 for use.

35xx plus 20231221 OS Changelog:

New Features:
-Set the LED light status on/off during sleep.
-DC, ATOMISWAVE, and NAOMI simulators can switch the cross key simulation joystick function through the power button.

Updates:
-Add a PCECD folder for the PCE CD simulator, no longer sharing the PCE folder.
-WiFi password character limit changed to 40 characters.
-Revised arcade icon text to be abbreviated as H.Brew.

Bug Fixes:
-Spanish translation error issue.
-Other known issues.

EnglishSpain

If you need a new Retro Game Handheld Device, you can buy here!
Directly from >>ANBERNIC<<